
Independent spray foam checks for homeowners, buyers and landlords
Insulation assessment in Taunton, Somerset you can act on
An insulation assessment in Taunton, Somerset tells you exactly what is in your loft, roof or cavity and whether it is causing damp, mortgage or resale problems. We inspect spray foam, mineral wool and vapour barriers, then give you a plain-English report with photos and costs. If you need an insulation survey in Taunton before a sale, purchase or retrofit, we book same-week visits across Somerset.
What's included
What our insulation assessment includes
Every assessment covers the full property, not just the obvious loft. We check insulation type, condition, moisture and compliance, then give you a written report with photographs and costs. Removal work is quoted separately so you can decide what to do next.
Loft and roof void inspection
We inspect rafters, ceiling joists, wall plates and roof felt for spray foam, mineral wool and vapour barrier. We note coverage, depth and any gaps, and photograph every defect we find.
Moisture meter readings
We take readings at multiple points using a calibrated moisture meter. Timber above 20 percent moisture is flagged as at risk of rot. You get the percentages in the report, not just a red or green light.
Thermal imaging survey
A thermal imaging camera shows cold bridging, air leaks and damp pockets invisible to the eye. We scan ceilings, walls and roof slopes, and include the images in your report so you can see what we found.
Foam identification
We identify open cell spray foam, closed cell spray foam and known brands such as Icynene, BASF and Soudal. The type matters because lenders treat them differently and removal methods vary.
Compliance and lender check
We check for building regulation non-compliance, missing ventilation and signs of off-gassing. If a mortgage lender has raised a query, we write the report to address it directly.
Written report and quote
Your report arrives within 24 to 48 hours with photographs, moisture readings, recommendations and a fixed removal quote if needed. It is written for lenders, solicitors and surveyors to read without follow-up questions.
Service overview
What an insulation assessment in Taunton, Somerset covers
An insulation assessment in Taunton, Somerset is a room-by-room inspection of the insulation already fitted to your property, how it performs and whether it is compliant. We check loft and roof voids, cavity walls, floor voids and cold bridging, then test for trapped moisture with a moisture meter and thermal imaging camera. We identify open cell spray foam, closed cell spray foam, mineral wool and vapour barrier layers, and note any missing or failed sections. You get a written report with photographs, moisture readings and a clear recommendation.
Taunton's 2026 housing stock throws up predictable problems. Older terraces around the town centre and Halcon often have mineral wool that has slumped or been soaked by a slipped roof tile. Post-war semis in Galmington and Comeytrowe frequently have cavity wall insulation that has bridged the cavity and is pulling damp into the plasterboard. Newer builds in Monkton Heathfield may have spray foam fitted by a previous owner with no paperwork. Lenders now ask for an insulation survey Taunton Somerset buyers can rely on, and that is exactly what we produce.
The service timeline
How our insulation assessment process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Book and qualify
Call 0182 329 7064 or send us your postcode. We ask what has triggered the assessment: a mortgage query, a damp patch, a cold room or a recent survey. That tells us whether to prioritise loft, roof, cavity or floor. We book a same-week slot, usually within two to three working days.
On-site inspection
Our technician arrives with a thermal imaging camera, moisture meter and PPE respirator. We inspect the loft or roof void, check insulation depth and coverage, and look for spray foam, mineral wool, vapour barrier and signs of condensation. A typical three-bed semi takes 60 to 90 minutes.
Moisture and thermal testing
We take moisture readings at rafters, ceiling joists and wall plates, then scan with thermal imaging to find cold bridging and air leaks. Where spray foam is present we identify open cell or closed cell foam and check for off-gassing or shrinkage. Readings are logged against each location.
Written report and photos
You receive a report within 24 to 48 hours. It lists what insulation is fitted, its condition, moisture percentages, any building regulation non-compliance and whether it is safe to leave. We include photographs of every defect and a recommended scope of works with costs.
Recommendation and next steps
We talk you through the findings by phone and answer questions. If removal is needed we quote for spray foam removal, dry ice blasting or sand blasting as appropriate. If the insulation is sound we tell you so, and you keep the report for your lender, buyer or records.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds cold bridging, air leaks and damp pockets behind plasterboard and insulation. The images go into your report as visual proof.
Moisture meter
Takes calibrated readings from rafters, joists and wall plates. Timber above 20 percent moisture is flagged as at risk of rot.
Industrial vacuum extractor
Captures foam dust and debris during removal so your loft and living space stay clean. Used with an air scrubber on larger jobs.
Air scrubber
Filters airborne particles during and after removal, which matters where isocyanate or polyol resin residues are present.
PPE respirator
Protects our technicians from foam dust and off-gassing. We also advise on ventilation before you re-enter the loft.
Reciprocating saw
Cuts through rigid closed cell spray foam without damaging rafters. Used alongside an oscillating multi-tool in tight corners.
Dry ice blasting machine
Lifts foam from delicate brick and timber surfaces with no chemicals and minimal mess. We confirm suitability during the assessment.
Use cases
When to book an insulation assessment
These examples show how the service framework adapts rather than forcing every call through one repair.

Damp bedroom fixed in Taunton Town Centre
A terraced house near the town centre had a damp patch spreading across the back bedroom wall. The owner assumed the roof was leaking and had already paid for a roof repair that did not solve it. → Thermal imaging showed the problem was cavity wall foam bridging the gap and pulling moisture inward. We removed the foam, restored the cavity and the wall dried out within four weeks. Moisture readings dropped from 22 percent to 9 percent.
Loft conversion saved in Monkton Heathfield
A homeowner in Monkton Heathfield planned a loft conversion but the builder found closed cell spray foam between the rafters. The project was paused because no one could confirm whether the foam was structural or safe to leave. → Our assessment confirmed the foam was sound and dry, but it blocked the ventilation path the conversion needed. We removed only the affected sections, kept the rest, and saved the owner around 2,800 pounds compared with full removal.
Problems we solve
Problems our insulation assessment in Taunton solves
Most people call us after a surveyor, lender or buyer raises a concern. Some call because a room is cold or a wall is damp. Either way, the assessment tells you what is actually happening and what it will take to fix it.
Mortgage lender refuses loan over spray foam
We assess the foam, document its type and condition, and produce a report your lender can accept. If removal is required we quote for it and provide completion evidence once the work is done, so your mortgage can move forward.
Damp and condensation from trapped moisture
Our moisture meter and thermal imaging camera find where the damp is sitting. We identify whether the insulation is the cause, then recommend removal, ventilation or a breathable replacement. Most damp issues we find are resolved without structural work.
Reduced property value and difficulty selling
An independent insulation assessment Taunton sellers can hand to buyers shows you have investigated the issue. It sets out what is fitted, whether it is a problem, and what removal would cost, which keeps the negotiation grounded in facts.
Building regulation non-compliance
We check insulation against PAS 2035 principles and current building regulation expectations. Where work is non-compliant we set out what needs to change, and we can carry out removal or reinstatement to bring the property back in line.
Pricing process
Insulation assessment pricing in Taunton
180 - 450 pounds depending on property size and scope
Property size and access
A three-bed semi with a single loft hatch is at the lower end. Larger houses, multiple roof voids, flat roofs or restricted access take longer and cost more.
Number of insulation types present
If your property has spray foam, mineral wool and cavity insulation, we assess all three. Each additional system adds time and reporting detail.
Commercial or domestic
Warehouse and commercial assessments involve larger areas, higher access equipment and method statements. They are priced per project rather than per house.
How much does insulation assessment cost in Taunton?
Most Taunton insulation assessments cost between 180 and 450 pounds depending on property size and access. A standard three-bed semi with a loft inspection sits at the lower end. Larger homes, multiple roof voids or commercial units cost more. The price is fixed before we visit, and the written report is included. If removal is needed, that is quoted separately.
Who does insulation survey in Taunton Somerset?
British Spray Foam Co carries out insulation surveys across Taunton and Somerset. We have been trading since 2021 and hold a City & Guilds insulation qualification, NVQ in Insulation and Building Treatments, TrustMark registration and CHAS accreditation. We assess spray foam, mineral wool and cavity insulation, and we produce reports that lenders and solicitors accept.
What does an insulation assessment include in Taunton?
It includes a loft or roof void inspection, moisture meter readings at rafters and wall plates, thermal imaging to find cold bridging, identification of open cell or closed cell spray foam, and a check for vapour barrier and building regulation non-compliance. You get a written report with photographs, moisture percentages and a recommended scope of works within 24 to 48 hours.
Is insulation inspection free in Taunton?
No, we charge a fixed fee for the inspection and report because it takes 60 to 90 minutes on site plus report writing. The fee is confirmed before booking and starts at 180 pounds for a standard domestic property. If you proceed with removal work through us, we credit the assessment fee against the removal quote.
Ready when you are
Book your insulation assessment in Taunton, Somerset
Fixed-price assessment, written report within 48 hours, and a straight answer on whether your spray foam can stay. We are TrustMark registered and CHAS accredited. Call 0182 329 7064 or request a callback and we will book you in this week.

Talk with the local team
Request Insulation Assessment
Ring 0182 329 7064 between 8am and 6pm Monday to Friday and you will get a real person who can book a survey on the spot. Out of hours, the emergency line stays open for storm damage and leaks. Email works too, and we reply the same working day.


