Dry Ice Blasting Spray Foam Removal

Clean, fast foam extraction for lofts, roofs and walls across Somerset

Dry Ice Blasting Spray Foam Removal in Taunton

Dry Ice Blasting Spray Foam Removal in Taunton is the cleanest way to strip failed open cell and closed cell foam from your loft, roof deck or wall cavity. We handle mortgage-lender refusals, damp timber and botched DIY spray jobs across Taunton and Somerset. Most lofts are cleared in a single day with no chemical residue left behind.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the repairScope and price explained upfront

What's included

What Our Dry Ice Blasting Spray Foam Removal Includes

Every Taunton job includes the survey, containment, blasting, extraction, cleanup and a written report. Replacement insulation is quoted separately, so you only pay for what you actually need.

01

Full Foam Survey

Thermal imaging camera and moisture meter readings, foam type identification and a written report on timber condition. This is what your lender or surveyor will ask for.

02

Containment and Dust Control

Sheeting, air scrubber and dust extraction unit set up before blasting starts. We protect your loft hatch, carpets and neighbouring rooms throughout the job.

03

Dry Ice Blasting and Extraction

The full removal itself, using the dry ice blasting machine plus hand tools for edges. Debris is bagged and removed from site by licensed waste carriers.

04

Moisture Testing After Removal

We re-test the timber with a moisture meter once the foam is off, so you know whether the roof structure is sound or needs further work.

05

Photographic Evidence Pack

Before-and-after photographs of every elevation, formatted for mortgage lenders and surveyors. Most Taunton valuations are signed off without a second visit.

06

Replacement Insulation Quote

Optional quote for mineral wool, Kingspan or Rockwool boards fitted to PAS 2035 standards. We only recommend it if the roof space actually needs it.

Service overview

What Dry Ice Blasting Spray Foam Removal in Taunton Involves

Dry Ice Blasting Spray Foam Removal in Taunton uses compressed dry ice pellets fired at -78.5C to freeze and shatter cured polyurethane foam without gouging the timber or plasterboard underneath. The pellets sublimate on impact, so there is no sand blasting media to sweep up, no water damage and no chemical residue. We pair the blasting machine with an industrial vacuum extractor and dust extraction unit to capture every fragment as it comes off the rafters.

Taunton homeowners call us when a mortgage lender refuses to lend on a property with spray foam in the roof, or when trapped moisture has started to rot the roof timbers. If you have been searching for dry ice blasting foam insulation removal Taunton Somerset, we cover the whole town and surrounding villages. We also handle dry ice blasting spray foam removal Taunton cost questions upfront before we start.

No Damage to TimbersDry ice pellets freeze the foam until it shatters, so the reciprocating saw and oscillating multi-tool only come out for stubborn edges. Your rafters, trusses and plasterboard stay intact, which matters when a surveyor inspects the roof after removal.
Mortgage Lender ReadyMost lenders want photographic proof the foam is gone and the roof is breathable again. We document every stage, so your Taunton surveyor can sign off the property without a second visit or a further retention on the mortgage.
Same-Day Loft ClearanceA typical Taunton loft of 40 to 60 square metres is cleared in six to nine hours. We arrive at 8am with the dry ice blasting machine and air scrubber, and you have a foam-free roof space by late afternoon.
Dry Ice Blasting Spray Foam Removal by British Spray Foam Co
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Spray Foam Extraction Process Works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Survey and Quote

We inspect the foam with a thermal imaging camera and moisture meter, check the timber for rot and confirm whether it is open cell or closed cell. You get a fixed price the same day, usually within two hours of the visit.

Stage 1
02

Containment Setup

We sheet the loft hatch, seal doorways and set up the air scrubber and dust extraction unit. Neighbouring rooms stay clean, and the PPE respirator and full containment mean no isocyanate dust drifts through the house.

Stage 2
03

Dry Ice Blasting

The dry ice blasting machine fires pellets at the foam until it cracks and lifts. A two-man team clears roughly 8 to 12 square metres per hour on open cell foam, slower on dense closed cell polyurethane.

Stage 3
04

Extraction and Cleanup

The industrial vacuum extractor pulls the debris straight into sealed bags. We hand-finish edges with the oscillating multi-tool, then sweep and hoover the whole roof space before we pack up.

Stage 4
05

Report and Handover

You get before-and-after photographs, a moisture reading for the timber and a written summary for your lender or surveyor. We also quote for replacement insulation such as mineral wool or Kingspan boards if you want it.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Dry ice blasting machine

Fires dry ice pellets at -78.5C to freeze and shatter cured polyurethane foam without cutting into the timber underneath.

02

Industrial vacuum extractor

Captures foam fragments and dust as they come off the rafters, keeping the loft and the rest of the house clean.

03

Thermal imaging camera

Finds hidden moisture, cold bridges and areas where foam has failed or been applied unevenly.

04

Moisture meter

Gives a precise timber moisture reading before and after removal, which is the number lenders and surveyors want to see.

05

Reciprocating saw and oscillating multi-tool

Hand-finishes stubborn foam at eaves, valleys and around services where the blasting machine cannot reach.

06

Air scrubber and dust extraction unit

Keeps airborne dust and isocyanate particles under control during blasting, especially in occupied homes.

07

PPE respirator

Protects our technicians from foam dust and off-gassing, and reassures homeowners that the job is being handled properly.

Use cases

When You Need Dry Ice Blasting Spray Foam Removal

These examples show how the service framework adapts rather than forcing every call through one repair.

Dry Ice Blasting Spray Foam Removal
Victorian Terrace Loft in Taunton Town CentreA 55 square metre loft packed with closed cell foam sprayed directly onto the roof felt. The surveyor found damp in three rafters and the lender refused to lend until the foam was gone. → Foam removed in two days with dry ice blasting. Moisture readings dropped from 24% to 13% on the affected rafters. The lender signed off the valuation a week later.

1960s Semi in Galmington

Open cell foam had been sprayed over the loft floor and up the roof slope, blocking ventilation. The homeowner had mould on the ceiling and a heating bill that kept climbing. → The foam came off in a single day. We replaced the failed vapour barrier and fitted Kingspan boards to PAS 2035 standards. The loft is now dry and noticeably warmer.

Warehouse Roof near Norton Fitzwarren

A 400 square metre metal roof deck covered in closed cell foam that was trapping condensation and causing surface rust along the purlins. → Dry ice blasting cleared the foam over a weekend with no water used, so the rust did not spread. The deck was clean and dry and ready for a modern insulated roof system.

Problems we solve

Spray Foam Problems We Solve for Taunton Homeowners

Spray foam was sold as a quick fix, but in Taunton's older housing stock it often causes more problems than it solves. Here are the issues we deal with most often.

ISSUE

Mortgage lender refusal due to spray foam

We remove the foam with dry ice blasting and provide the photographic evidence and moisture readings your lender needs. Most Taunton cases are resolved within two weeks of the survey.

SYMPTOM

Damp and condensation from trapped moisture

Dry ice blasting strips the foam without adding water, then we test the timber and replace any vapour barrier that has failed. We can fit breathable insulation so the roof dries out properly.

SIGN

Roof timber rot and structural damage

We survey with a moisture meter and thermal imaging camera, blast the foam off, and tell you honestly whether the timber is sound or needs a carpenter. Our reports flag exactly what needs replacing.

ALERT

Difficulty selling the property

We clear the foam, document the whole job and hand you a report you can show buyers. A clean, breathable roof space removes the main objection and gets the sale moving again.

Pricing process

Dry Ice Blasting Spray Foam Removal Costs in Taunton

1,800 - 4,500 pounds for a residential loft; 6,000 pounds upwards for commercial roofs

Phase 01

Foam type

Open cell foam blasts off quickly and costs less per square metre. Closed cell polyurethane is denser and bonded harder to the timber, so it takes longer and costs more.

Phase 02

Roof area and pitch

A 40 square metre loft is a one-day job. A 100 square metre roof with a steep pitch or multiple valleys can take three days or more, which affects the price.

Phase 03

Access and height

Tight loft hatches, restricted parking and tall roofs all slow the job down. We assess access at the survey so there are no surprises on the day.

Questions before we arrive

Frequently Asked Questions

Dry Ice Blasting Spray Foam Removal
Call 0182 329 7064
How much does dry ice blasting spray foam removal cost in Taunton?

Typical 2026 pricing in Taunton runs from 1,800 to 4,500 pounds for a standard loft, depending on foam type and access. Closed cell foam costs more because it is denser and slower to blast. Larger roofs, difficult access and asbestos checks push the figure higher. We give you a fixed price after a free survey.

Who does dry ice blasting foam insulation removal in Taunton Somerset?

British Spray Foam Co does. We are a Taunton-based spray foam removal firm founded in 2021, covering the whole of Somerset. We handle open cell and closed cell foam, loft and roof deck extraction, and mortgage lender cases. Call 0182 329 7064 and we will book a survey.

Is dry ice blasting safe for spray foam removal in Taunton?

Yes. Dry ice blasting is one of the safest methods because it uses no water, no solvents and no abrasive media. The pellets sublimate on contact, so there is nothing left to react with the timber. We still use a PPE respirator and air scrubber to control dust, and we test the timber with a moisture meter afterwards.

Can dry ice blasting foam removal be done same day in Taunton?

Yes for smaller lofts. A single loft of 30 to 40 square metres can be surveyed and blasted in one day if you book an early slot. Larger roofs and commercial units usually take two to three days. We confirm the schedule when you call, and we can often fit urgent lender deadlines.

Ready when you are

Book Dry Ice Blasting Spray Foam Removal in Taunton Today

Free survey, fixed price, and a written report your lender will accept. Call British Spray Foam Co on 0182 329 7064 and we will book your Taunton survey, usually within three working days.

Dry Ice Blasting Spray Foam Removal

Talk with the local team

Request Dry Ice Blasting Spray Foam Removal

Ring 0182 329 7064 between 8am and 6pm Monday to Friday and you will get a real person who can book a survey on the spot. Out of hours, the emergency line stays open for storm damage and leaks. Email works too, and we reply the same working day.

Blackbrook Park Ave, Taunton TA1 2PG, Taunton, SomersetMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now